Hamamatsu S11299-021 silicon Si photodiode array 16-pixel silicon photodiode array

Hamamatsu S11299-021 silicon Si photodiode array 16-pixel silicon photodiode array

Details:

Back-illuminated photodiode array for X-ray non-destructive testing, slender plate type

The S11299-021 is a back-illuminated 16-element photodiode array designed for X-ray non-destructive testing. Compared to the S5668 series, it has higher sensitivity, uniformity, and photodiode element stability. The back-illuminated photodiode array is easy to operate and easy to couple to the scintillator because there are no bonding lines and light-sensitive areas on the back side to worry about damaging the circuit. The S11299 series is compatible with dual-energy imaging because it can be used in combination with the S11212 series [size: 25.4 (W) × 20.0 (H) mm] to detect both high and low X-rays in an upper and lower layer structure.

Product Features:
● Spectral response range: 340 to 1100nm
● Component size: 1.175 (width) × 2.0 (height) mm / single component
● Component pitch: 1.575 mm (× 16 pixels)
● Mounting size on board: 25.4 (width) × 10.2 (height) mm
● A variety of combination forms, wide and narrow can be applied
● Support dual-energy imaging (for upper and lower layer structures)

Precautions
The chip of this product is not sealed and exposed. Parts such as electrodes on the chip are not protected by housings or windows, so special care is required during handling compared to ordinary products.
Before using this product, be sure to read the following PDF file “Unsealed Products/Precautions”.